logIt Log Around The Clock

Posts Tagged ‘snmp’

Zabbix Proxy: distributed NMS monitoring via embedded Linux (Ubuntu on BeagleBoard)

In ARM Linux on 19 July 2012 with no comments 653 views

As already mentioned in previous post’s introduction, proof of concept on how Zabbix Proxy works under unreliable communication is what this next post about. The idea is to have these scenarios tested: independent SNMP data polling by individual NMS proxy (embedded system) intermittent connection between main/master NMS server with its proxy Of course we’ll do [...]

Compile Zabbix Proxy in Ubuntu ARM (BeagleBoard)

In ARM Linux, Ubuntu on 17 July 2012 with no comments 1488 views

I needed to tackle practical limitation of SNMP monitoring under unreliable communication, a serious consideration was made for Zabbix Proxy. It was an option said to be ready for embedded hardware. I already had BeagleBoard xM Rev C running Ubuntu 11.10 Oneiric and needed to proof that it would port functionally to this Linux ARM [...]

SNMP: Mistake of Using Tabular OID in Practice

In General Linux on 20 March 2012 with no comments 827 views

Recently, I retrieve rectifier-related SNMP data from Eltek’s Smartpack Controller. This one has the following rear type where we can connect to the ethernet plug (see the purple area). It is presumably in its default configuration and I can snmpwalk through its corporate specific OIDs (under 12148 tree) to find i.e. output voltage, current, battery [...]

Write Your Own MIB File (Tabular)

In General Linux on 9 September 2011 with 1 comment 11868 views

When it comes to writing our own MIB, a practical choice might be to write the whole objects as of scalar type (RFC-1212). That means, let’s say we have 2 battery statuses, each of them must be explicitly written individually within the MIB file. Example of calling their voltages: $ snmpwalk -m +REKTRONIK-MIB -v 1 [...]

Running Raddle (2): snmpd & Replay Custom Private Enterprise MIB

In General Linux on 18 August 2011 with no comments 117 views

Net-SNMP wiki gives tutorial on extending snmpd using Perl. In basic run of Raddle (previous post) this involves r1.pl called by r1.conf fed to snmpd. Private enterprise MIB i.e. Microchip’s in this example can be replayed without really ever captured the real device’s SNMP data. This is necessary when the actual device is yet existed; normal [...]

Running Raddle in RHEL

In General Linux on 15 August 2011 with no comments 157 views

Raddle is a great SNMP player written in Perl. I say player to this emulator application, meaning that I can append or dump snmpwalk output from a device and then replay that from Raddle. Installing it can be both simple and tedious tasks. I used Red Hat Enterprise Linux 5.2 inside a virtual machine (VirtualBox) [...]

Configuring Cacti

In General Linux on 2 September 2009 with no comments 5 views

A successful installation in a LAMP system may require more library. I added php5-cli to enable php through command line i.e $ /usr/bin/php , libphp-adodb, php5-snmp. In localhost snmpd is installed and configured /etc/default/snmpd: SNMPDOPTS=’-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid’ and edit /etc/snmp/snmpd.conf to have: com2sec readonly  localhost         <some community string> Install [...]